Home > News >
hot products
Drilling Decanter Centrifuge

Drilling Decanter Centrifuge

KOSUN DC Series Drilling Decanter Centrifuge,Decanting Centrifuge is used to separate suspended solid>>More

Drilling Shale Shaker

Drilling Shale Shaker

Shale shaker,drilling mud shale shaker manufacturer,linear motion shale shaker is the first grade of >>More

Drilling Mud Cleaner

Drilling Mud Cleaner

KOSUN drilling mud cleaner is the second or third stage separation equipment of drilling liquid, whic>>More

Drilling Mud Desander

Drilling Mud Desander

KOSUN desander,drilling mud desander is used as the 2nd stage of drilling solids control system, for >>More

Drilling Mud Desilter

Drilling Mud Desilter

Desilter,drilling mud desilter is used as the 3rd stage of drilling mud system, for which the solids >>More

KOSUN Zero-discharge Drilling Mud Treatment System in Inner Mongolia


    Pubdate:Jun 17, 2015
Dedicated to production and R&D of drilling solids control equipment and drilling waste management (zero discharge of drilling waste) equipmentKOSUN Zero-discharge Drilling Mud Treatment System in Inner Mongolia

Dedicated to production and R&D of drilling solids control equipment and drilling waste management (zero discharge of drilling waste) equipment, KOSUN has sold the equipment to multiple countries and regions worldwide and treatment effect is well received by customers. Domestic zero discharge of drilling waste projects have skyrocketed since this year. KOSUN’s complete set of zero discharge drilling waste equipment is servicing successfully at CNPN Sulige gas field in Inner Mongolia.

Picture 1 KOSUN Dryer Servicing at CNPC Site in Inner Mongolia

Picture 1 KOSUN Dryer Servicing at CNPC Site in Inner Mongolia

Traditional cuttings dryer only applies to drying treatment of OBM(oil based mud )cuttings worldwide and cannot meet drying treatment requirements of WBM (water based mud )cuttings. Screen blockage occurs frequently, which results in service failure of cuttings dryer in water-based mud field.

KOSUN organized technical group of the company to surmount this technical difficulty with domestic and overseas experts in the industry. Technical improvements are made on the traditional cuttings dryer, adding multiple supporting equipment of new technology, such as intelligent electronic impulse flusher, air supply system, air conditioning system, water source filter, etc. for successful development of KOSUN G2 vertical cuttings dryer. Additionally, various improvements on configuration parameters, technological process and technical operation make KOSUN G2 vertical cuttings dryer VC2000 serve successfully in water-based mud field and it is the first cuttings dryer .successfully applied in water-based mud treatment so far in the world.

Picture 2 KOSUN G2 Cuttings Dryer Successfully Applied in WBM (water based mud ) Treatment

Picture 2 KOSUN G2 Cuttings Dryer Successfully Applied in WBM (water based mud ) Treatment

Birth of KOSUN G2 cuttings dryer means that VC series cuttings dryer can implement drying treatment of various kinds of cuttings, including WBM (water based mud ) cuttings, oil0bsed mud cuttings, synthetic-based mud cuttings, etc.

OOC after cuttings dryer treatment maintains between 5%-8% and the customer is very satisfied with the treatment effect. Successful application of the system in water-based mud field leads to new breakthrough of zero-discharge of WBM (water based mud ) in China and truly realizes discharge reduction from source, achieving purposes of zero-discharge of WBM (water based mud ) and recycling of waste mud. This technology has already applied for national patent.
 

Through treatment by KOSUN WBM (water based mud ) dryer system, solids discharge is greatly reduced and drilling fluid in drilling waste can be separated and recovered by high speed VFD centrifuge, which realizes drilling fluid recycling in drilling solids control system. Besides saving a large amount of drilling fluid cost for drilling company, the system also reduces handling and centralized processing cost of drilling waste, proven to be the best choice for zero discharge drilling waste project for drilling companies.

Meanwhile, KOSUN Hi-G dryer shaker system equipment is also servicing at CNPC drilling site. After Hi-G dryer treatment, OOC drops to 15%-17%, which meets processing standard and handling requirements of Party A. Cuttings can be directly transferred to central treatment station for processing without solidification at site.

KOSUN zero discharge drilling waste treatment system equipment is selling hot and the demand exceeds the supply. Feel free to visit our company and drilling site for field research. Look forward to customers from all over the world for cooperation and purchase.

Contacts: 029-89565356 ext. 807 / 851 029-87304914

E-mail: business@adkosun.com

For more product information, please visit our website http://www.decantingcentrifuge.com.

Welcome To Xi’an KOSUN Machinery Co., Ltd.

Solids Control Equipment & Integrated Drilling Waste Management